Shark-skin film can save each aircraft 400 tonnes of fuel a year

Shark-skin film can save each aircraft 400 tonnes of fuel a year

Lufthansa Technik and BASF’s shark-inspired AeroShark film could save a long-haul aircraft around 400 tonnes of fuel annually by cutting drag.

A thin film inspired by shark skin can save an equipped long-haul aircraft around 400 tonnes of kerosene a year, according to figures reported by Engineerine. That estimate comes with conditions: it reflects roughly a 1% efficiency improvement in long-haul operations, not a guaranteed saving for every aircraft.

Developed by Lufthansa Technik and BASF, AeroShark is a polymer film covered in microscopic ridges. It’s already used on long-range, wide-body aircraft operated by Swiss International Air Lines and Lufthansa’s cargo division. The aim is to reduce drag without redesigning the aircraft or replacing its engines.

The reported installation covers about 950 square metres of fuselage and engine nacelles. The source describes a reduction of more than 1% in skin-friction drag, then links an approximately 1% efficiency gain on long-haul flights to annual savings of around 400 tonnes of fuel and 1,200 tonnes of carbon dioxide per aircraft. These are different measures: a percentage reduction in one component of drag doesn’t automatically translate into the same percentage reduction in fuel consumption.

Boeing 777-8 Freighter wide-body cargo aircraft

Engineerine also describes the annual benefits more broadly as hundreds of tonnes of fuel and thousands of tonnes of carbon dioxide per aircraft. Its specific 1,200-tonne emissions estimate is the more concrete figure attached to the 400-tonne fuel claim. These figures shouldn’t be treated as universal results across aircraft types and deployments, or multiplied into a fleet total without knowing which aircraft and operating conditions they describe.

The physics starts with the thin layer of air moving along the aircraft’s skin. For a Boeing 777 cruising at about 900 km/h, the source attributes roughly half of total drag to friction in the turbulent boundary layer along the fuselage. Swirling air close to the surface transfers momentum and creates resistance, effectively pulling backward on the aircraft.

AeroShark changes how that near-surface turbulence behaves. Its triangular ridges, called riblets, are about 50 micrometres high, roughly the thickness of a human hair. Aligned with the airflow, these tiny rails restrict the sideways movement of vortices and keep them from penetrating as deeply between the ridges, reducing local skin friction.

Boeing 777-9 wide-body aircraft

That’s a different approach from simply making everything shinier. Aircraft designers have long pursued smooth exterior surfaces, spending heavily on polishing riveted aluminium fuselages and refining mirror-smooth polyurethane topcoats that protect carbon-fibre structures. The source presents riblets as a challenge to the longstanding assumption that the smoothest possible surface always produces the least drag.

The biological clue emerged in the 1970s and 1980s, when marine biologists and researchers at the German Aerospace Center studied the textured skin of fast-swimming sharks. The shortfin mako, Isurus oxyrinchus, can swim at up to 70 km/h, according to the account, yet its skin is far from smooth.

Shortfin mako shark. Photo: Mark Conlin/SWFSC, via Wikipedia, public domain.

Shark skin carries microscopic, tooth-like structures called dermal denticles, aligned with the flow of water. Engineerine reports that this texture can reduce water-friction drag by up to 8%. That biological figure isn’t the aircraft’s fuel-saving figure; it explains the inspiration for the engineered surface.

Turning that pattern into an aircraft coating took decades of materials research. Lufthansa Technik and BASF needed a polymer film that could retain its microscopic shape and stay attached in the conditions encountered at 11,000 metres.

The temperature swings alone are punishing. The source describes an aircraft climbing from 60°C heat above a tropical apron into air at -60°C in the stratosphere within half an hour. Intense ultraviolet radiation, ice crystals and aggressive de-icing chemicals also attack the exterior. Earlier generations of riblet film often failed, cracked or peeled away under these stresses.

Installation brings another trade-off. Applying the film is labour-intensive and requires precise manual work. It also adds a small amount of weight, so the drag reduction must more than offset the fuel penalty of carrying that extra layer. The source’s assessment is that modern materials have made the economic balance clearly positive, giving the shark-inspired texture a practical role in aviation.

The retrofit approach matters here: the film can be attached to existing aircraft without major structural or engine modifications. Current applications focus mainly on high-capacity wide-body aircraft flying continental and intercontinental routes, where long flight times allow the friction reduction to deliver the greatest savings. For an airline assessing a fleet installation, that operating profile is the key condition behind the headline number.

The Genius Geek
The Genius Geek

The Weekly Geek

Don't miss a thing: get our top stories in a weekly roundup.